4 Insert your left hand between the cabling and
the drive cage. Your hand should be touching
both sides of the drive cage as you push it
toward the front of the computer. Push the
drive cage until it slides partway out.
Note:
The center part of the front cover moves with the
drive cage.
LATCH
36
hp pavilion home pc
Filename: ma1rwsc.doc
Title: HP-Print2k.dot
Template: HP-Print2K.dot
Author: Ann Schmidt
Revision #: 198
Page: 36 of 70
Printed: 04/26/01 11:33 AM
5 Release the latch.
6 Grabbing the top of the drive cage, slide the
cage about halfway out.
Note:
To replace the drive cage:
DRIVE CAGE
1 Push against the front panel with your right
hand while pushing against the back panel
with your left hand. The drive cage latch
engages when the drive cage is completely
pushed in.
2 Replace the screw (A), and the screw (B) if
present.
3 Reconnect any power supply cables you may
have disconnected.
Last Saved By: Jerry C. Stogsdill
In order to slide the drive cage out sufficiently,
you may need to disconnect the cables going to
the drives. (On some cables, you may need to
press the locking lever on the connector.) Be
sure to note the placement of these connections;
you will need this information when
reconnecting the cables.