HP Pavilion xl900 - Desktop PC Service Manual page 45

12 Hold the DIMM in alignment with the socket,
aligning the notches with the bumps.
13 Push straight down on top of the DIMM until it
is fully seated in the socket. The retaining clips
on the ends of the socket automatically lock
into position when the DIMM is fully seated.
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt
Revision #: 198 Page: 41 of 70
To reassemble the computer:
1 If you moved any cabling, restore the cable
connections and routing.
2 If you moved the drive cage, slide the drive
cage back in (see "Sliding the Drive Cage In
and Out" on page 35).
3 If you opened the back panel door, close the
door and replace the screws.
4 Replace the side panel (see "Replacing the
Side Panel" on page 54).
5 Reconnect the power cord and all other
cables.
6 Reconnect the modem/phone cable.
7 Turn on the computer and all peripherals.
Last Saved By: Jerry C. Stogsdill
Printed: 04/26/01 11:33 AM
upgrading and servicing the pc
41