Sliding The Drive Cage In And Out - HP Pavilion xl900 - Desktop PC Service Manual

5 Place the fingers of your right hand in the
indentation on the side panel and your thumb
on the back panel.
6 Pull backward on the panel and rotate the
front end of it to the right. It will disengage.
7 Remove the panel and set aside.
8
hp pavilion home pc
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt
Revision #: 198 Page: 8 of 70 Printed: 04/26/01 11:33 AM

Sliding the Drive Cage In and Out

The drive cage must be moved out to allow
access to some components on the motherboard.
You may need to slide the drive cage out in order
to add memory, insert add-in cards, replace an
optical drive, or change the battery.
Note:
Make sure the computer is turned off and the
modem/phone cable and power cord are
disconnected from the computer.
To slide the drive cage out:
1 Remove the front drive cover (see "Removing
the Front Drive Cover" on page 6).
2 Using a #2 Phillips screwdriver, remove the
screw below the diskette drive (A).
Last Saved By: Jerry C. Stogsdill