Drive Cage - HP EliteDesk 800 G4 SFF Maintenance And Service Manual

Drive cage

Rotate the drive cage to remove and install a 2.5-inch hard drive, and to access components underneath.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Rotate the drive cage to its upright position.
4. Rotate the drive cage back down to its normal position.
IMPORTANT:
40 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
Be careful not to pinch any cables or wires when rotating the drive cage down.
18).
17).