A
3 Remove the side panel (see "Removing the
Side Panel" on page 7).
4 While facing the front of the computer, reach
under the top edge of the left side of the
chassis and pull the latch (B) out. Continue to
hold the latch in this position while you
complete the next step.
Filename: ma1rwsc.doc
Title: HP-Print2k.dot
Template: HP-Print2K.dot
Author: Ann Schmidt
Revision #: 198
Page: 9 of 70
Printed: 04/26/01 11:33 AM
B
5 Grasp the top lip of the drive cage (C), and
pull it toward you.
6 Release the latch.
Note:
In order to slide the drive cage out sufficiently,
you may need to disconnect the cables going to
the drives. (On some cables, you may need to
press the locking lever on the connector.) Be
sure to note the placement of these connections;
you will need this information when
reconnecting the cables.
upgrading and servicing the pc
Last Saved By: Jerry C. Stogsdill
C
9