Main Circuit Board Dip Switch Functions - Brother BAS-705 Instruction Manual

8. DIP SWITCH

8-2.Main circuit board DIP switch functions

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from
the wall outlet before opening the face plate of the control box. Touching areas where high volt
ages are present can result in severe injury.
X-Y feed
circuit board
SW1
SW2
SW3
SW4
NOTE: The DIP switches on the X-Y feed circuit board should all be set to OFF.
ON
Setup function
Not available (Should be set to OFF)
Not available (Should be set to OFF)
Sewing data is initialized on startup.
DANGER
main circuit board
70
OFF
Normal operation
Normal operation
BAS-705