Brother BAS-705 Instruction Manual page 60

e
r
t
u y
1. Loosen the two set screws w of the fork bracket
q
w
2. Insert the new fork bracket r onto the fork bracket
r
q
w
57
6. STANDARD ADJUSTMENT (MECHANISMS)
[When replacing the fork bracket (separate type)]
shaft q, and then remove the fork bracket e from
the fork bracket shaft q.
shaft q until the end of the fork bracket r is
aligned with the end of the loop presser t, and then
tighten the two set screws w.
When replacing fork shaft L and fork shaft S
Loosen the set screw y and then replace for shaft
L and fork shaft S u.
BAS-705