Clearing Production Counter - Brother BAS-705 Instruction Manual

3-2-3 .Clearing production counter

The production counter increases by one each time a single belt loop is sewn.
The production counter can count up to a maximum of 9999.
MODE
w
PROGRAM MODE
Production counter
1st bobbin counter
2nd bobbin counter
PROGRAM MODE
Production counter
1st bobbin counter
2nd bobbin counter
PROGRAM MODE
Production counter
1st bobbin counter
2nd bobbin counter
SELECT CANCEL
ENTER
e
1. Press the MODE switch w to select PROGRAM
2. Use the
,,,,
3. Press the SELECT switch e to change the display to "0".
/
4. Press the ENTER switch t.
15
WARNING
t
mode.
SELECT switches e to move the
and
pointer " " so that "PRODUCTION COUNTER" is
selected.
* If the CANCEL switch r is pressed, the old
production counter setting will appear again on
the display.
* The production counter setting will now be
cleared.
3. PANEL OPERATION
POWER
RESET
r
BAS-705