Draining The Oil; Cleaning The Eye Guard; Checking The Needle; Cleaning The Machine Pulley - Brother BAS-705 Instruction Manual

7-3.Draining the oil

7-4.Cleaning the eye guard

7-5.Checking the needle

7-6.Cleaning the machine pulley

1. Remove and empty the waste oil container q when
ever it is full.
2. After emptying the waste oil container q , screw it
back into its original position.
q
Wipe the eye guard clean with a soft cloth.
NOTE: Do not use solvents such as kerosene or thinner
Always check that the tip of the needle is not broken
before starting sewing.
1. Remove the rubber plug at the bottom of the motor
installation base.
2. Use an air gun to blow air in through the four holes
on the top of the machine head in order to clean the
area around the machine pulley.
67
7. MAINTENANCE AND INSPECTION
to clean the eye guard.
BAS-705