Adjusting The Shuttle Hook Thread Guide; Adjusting The Movable Knife; First Bar Tacking - Brother BAS-705 Instruction Manual

5. STANDARD ADJUSTMENT (MACHINE HEAD)

5-6. Adjusting the shuttle hook thread guide

Install the shuttle race thread guide q by pushing it in the direction of the arrow so that the needle groove is
aligned with the center of the needle plate hole.
NOTE: If the shuttle race thread guide is in the wrong position, thread breakages, soiled thread or catching of
the thread may occur.

5-7. Adjusting the movable knife

5-7-1. First bar tacking

q
B
1. Tilt back the machine head. (Refer to "5-1. Tilting back the machine head.")
2. Loosen the nut w and move thread trimmer rod L e to the left or right to adjust so that the V section
movable knife q is aligned with the index mark
position.
q
A
on the needle plate when the machine is at the stop
40
w
e
of the
BAS-705