Brother BAS-705 Instruction Manual page 62

A
e
coincidence
o
6. Loosen the screw ! 2 and move loop presser UB ! 0 and loop presser UF ! 1 up and down to adjust so that the
belt loops o lie gently on top of loop support B t and loop support F u when the belt loops o are being
pressed during step operation.
u
!0
t
6. STANDARD ADJUSTMENT (MECHANISMS)
4. Loosen the two bolts
top of loop presser F e and the top of loop presser
B w are aligned.
5. Loosen the two bolts u of loop support F i, and
then align loop support F i with the top of loop
presser F e.
i
!2
59
and then adjust so that the
u
!1
BAS-705