Brother BAS-705 Instruction Manual page 72

SW2-1
SW2-2
SW2-3 Slow start up to the second stitch
If the thread tangles at the sewing start, the
machine automatically resets and starts
SW2-4
sewing again.
SW2-5
SW2-6
LOOP switch: continuous setting
SW2-7
resetting setting
When bobbin counters reach "0", they are
SW2-8
reset.
*1 The thread wiper operates when the power is turned on.
*2 If the thread becomes tangled within the first three stitches after sewing starts, the machine will return
automatically to the sewing start position and sewing will then start again.
ON
Operation in cold climates
Not available (Should be set to OFF)
*2
Not available (Should be set to OFF)
Not available (Should be set to OFF)
*1
When bobbin counters reach "0", they are
reset and sewing resumes.
69
8. DIP SWITCH
OFF
Normal operation
Normal operation
Normal operation
Normal operation
BAS-705