Discovery Protocols
This section includes:
■
Multicast DNS
on page 2-5
Service Location Protocol
■
Multicast DNS
To change the Multicast DNS (Bonjour) settings:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Click the Protocols folder on the left navigation panel.
5.
Select TCP/IP.
6.
If prompted, enter your Admin or Key User name and password.
7.
Under DNS Settings, in the Multicast DNS Enable field, select one of the following:
■
On: The printer can respond to Multicast DNS and be automatically discovered on an
IP network by Apple Macintosh OS X technology.
■
Off: The printer cannot be automatically discovered.
8.
If you select On, follow the instructions on the page. For more information, including a
description of the fields, click the Help button in CentreWare IS to view the online help.
9.
Click the Save Changes button.
Service Location Protocol
To change the configuration of the Service Location Protocol (SLP) Service Agent in the
printer:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Click the Protocols folder on the left navigation panel.
5.
Select TCP/IP.
6.
If prompted, enter your Admin or Key User name and password.
7.
Under Service Location Protocol (SLP) Settings, in the SLP Enable field, select On or
Off.
8.
If you select On, follow the instructions on the page. For more information, including a
description of the fields, click the Help button in CentreWare IS to view the online help.
9.
Click the Save Changes button.
on page 2-5
System Administrator Guide
2-5
Discovery Protocols