Xerox 8560MFP - Phaser Color Solid Ink Administrator's Manual page 86

PJL Command
@PJL SET/DEFAULT
XPCLTRAYSWITCH=value
@PJL DEFAULT XPCLPAPERSRCx = y
@PJL SET/DEFAULT XSLIPSHEET
@PJL SET XSLIPSHEETSOURCE
HP Printer Job Language Technical Reference for the values.
* See the
Values
ON, OFF
x is 0, 1, 2, 3, 4, 5,
6, 7, 8, 20, 21, 22,
23, which is the
number in the
<Esc>&l#H tray
selection
commands.
y is -1 for
AutoSelect, 0 for
the current tray
(eject page), 1 for
Tray 1, 2 for Tray 2,
etc., and 99 for the
factory defaults.
OFF, JOB, SET,
PAGE
TRAYX
System Administrator Guide
B-7
Phaser PJL Commands
Description
Switches trays when a tray goes
empty. If AutoSelect is chosen as
the paper source (tray) in PCL,
then tray switching is always
active, regardless of the value.
When the current tray goes
empty, the printer attempts to
switch to another tray containing
the same size and type of paper.
This command only takes effect
when a specific tray, such as
Tray 2, is selected in the job.
When this command is ON, tray
switching still occurs when the
tray goes empty. When this
command is OFF, no switching
occurs and the user is prompted
to load paper.
Overrides the tray selected in the
<Esc>&l#H PCL tray selection
commands.
Inserts a slip sheet between the
selected option.
Selects the slip sheet from the
specified tray.