Controlling Access To Color Copying - Xerox 8560MFP - Phaser Color Solid Ink Administrator's Manual

To enter a password in the driver:
1. Access the driver.
Note:
Usually you access the driver by clicking Print in your application, and then
clicking Properties.
2. On the Layout tab, click the Advanced button.
3. In the Color Access field, enter the numeric password.
The TekColor tab is now available for use and the user can print in color.

Controlling Access to Color Copying

To control the user's access to color copying, you can set the printer's control panel to require
a numeric password to copy in color.
1. Press the System button.
2. Select General Setup
3. Select System Controls, and then press the OK button.
4. Select Copy Password, and then press the OK button.
5. Select Enable Password, and then press the OK button.
6. Use the Up and Down Arrow buttons to select a password and then press the OK button.
menu, and then press the OK button.
System Administrator Guide
4-14
Controlling Access to Color Copying