Non-Sorting ("Non-Sort" Setting); Crisscross Non-Sorting ("Non-Sort" Setting); Sorting ("Sort" Setting); Crisscross Sorting ("Sort" Setting) - Kyocera KM-C2030 Operation Manual

5

Non-Sorting ("Non-Sort" Setting)

The copies are fed out and stacked on top of each other as they are printed.

Crisscross Non-Sorting ("Non-Sort" Setting)

The copies are fed out in an alternating crisscross pattern.
However, crisscross non-sorting is only performed if the follow-
ing conditions are met.
G The finisher is not installed.
G Paper of the same size and type must be loaded with the
landscape orientation (crosswise) in one paper drawer and
with the portrait orientation (lengthwise) in another drawer.
G The duplexing document feeder must be used.
G The document must not contain pages of various sizes (i.e.,
"Mixed Orig Detection" function not used).
G "Auto Paper" must be selected for the Paper setting.
G Staple and hole-punch Finishing settings must not be selected.
G The "Criss Cross Mode" function on the User's Choice: 2 screen must be set to
"Yes".
❍ For details on the "User's Choice" functions, refer to "Specifying Default Set-
tings ("User's Choice" Functions)" in the Administrator Operations volume.

Sorting ("Sort" Setting)

The copies are automatically divided into the specified number of sets with each set
containing a copy of each page.

Crisscross Sorting ("Sort" Setting)

Sets containing one copy of each page are fed out in an alter-
nating crisscross pattern.
However, crisscross sorting is only performed if the following
conditions are met.
G
The finisher is not installed.
G
Paper of the same size and type must be loaded with the
landscape orientation (crosswise) in one paper drawer and
with the portrait orientation (lengthwise) in another drawer.
G The document must not contain pages of various sizes (i.e.,
"Mixed Orig Detection" function not used).
G
"Auto Paper" must be selected for the Paper setting.
G
Staple and hole-punch Finishing settings must not be selected.
G
The "Criss Cross Mode" function on the User's Choice: 2 screen must be set to
"Yes".
5-4
5.2 Selecting a Finishing Setting
1 1
2
1 1
Example: For 4 sets
1 1
1
1 1
Example: For 4 sets
1 3
4
1 1
1