Memory Recall Screen - Kyocera KM-C2030 Operation Manual

6.3 Job Control Screens

Memory Recall Screen

Past copy jobs can be recalled and printed again.
Up to 49 past copy jobs are saved.
If the number of copy jobs exceeds 49 or the memory becomes full, jobs are delet-
ed, starting from the oldest.
Deleted jobs cannot be recalled.
Touch [Memory Recall]. The Memory Recall screen appears.
Jobs that have already been printed appear in order from the top of the list.
If the "Memory Recall" function on the User's Choice: 1 screen has been set to
"Yes", [Memory Recall] is available (jobs can be recalled from the memory).
However, if the "Memory Recall" function on the User's Choice: 1 screen has been
set to "No", all jobs are erased after they are finished being printed. ([Memory
Recall] is not available.)
Deleted jobs cannot be recalled.
For details on setting the "Memory Recall" function on the User's Choice:1 screen,
refer to "To set the "Memory Recall" function" in chapter 5 "Utility Mode Operation"of
the Administrator Operations volume.
Note
If the copier is turned off, all saved jobs are deleted and can no longer be
recalled.
6
6-21