To Recall A Stored Custom Zoom Ratio; To Specify Different Vertical And Horizontal Scaling Proportions ("X/Y Zoom" Setting) - Kyocera KM-C2030 Operation Manual

5.3 Specifying a Zoom Setting

To recall a stored custom zoom ratio

1
Touch [Zoom].
A screen appears, showing the available Zoom settings.
2
Touch [CustomZoom].
3
Touch [Set].
4
Touch [1], [2] or [Minimal].
5
Touch [Enter]. The entered zoom ratio is recalled.
To specify different vertical and horizontal scaling proportions ("X/Y Zoom"
setting)
1
Touch [Zoom]. A screen appears, showing the available Zoom settings.
2
Touch [CustomZoom].
3
Touch [X/Y Zoom]. The X/Y Zoom
screen appears.
4
Make sure that [X] is selected.
5
Using the keypad, type in the de-
sired length of side X (between
×0.250 and ×4.000). The entered
zoom ratio is displayed.
6
Touch [Y].
Using the keypad, type in the desired length of side Y (between ×0.250 and
7
×4.000).
The entered zoom ratio is displayed.
8
Touch [Enter].
The entered zoom ratio is displayed.
5
5-11