Loading Paper Into The Manual Bypass Tray - Kyocera KM-C2030 Operation Manual

3.5 Loading Paper

Loading Paper Into the Manual Bypass Tray

Paper can be fed manually through the manual bypass tray if you wish to copy onto
paper that is not loaded into a drawer, or if you wish to copy onto special paper.
1
Touch [Paper].
A screen that shows the specified paper size settings
appears.
2
Select the manual bypass tray.
3
The Paper Input Size
screen appears.
4
Select the setting for the size of paper that is loaded.
❍ For paper sizes in inch measurements, touch [Inch] to display a screen con-
taining inch paper size settings.
5
For a paper size other than the standard sizes listed on the screen, touch
[Custom Size] to display a screen that allows you specify a size.
6
Touch ,
and to select the
length of side X for the
paper that is loaded.
❍ Touch
the cursor moves
below the fraction
that you wish to
change.
7
Touch ,
and to select the
length of side Y for the paper that is loaded.
❍
Touch
change.
,
until
,
until the cursor moves below the fraction that you wish to
3
3-21