Selecting The Orig > Copy Settings (Copy Settings) - Kyocera KM-C2030 Operation Manual

5
5.6 Selecting the Orig > Copy Settings (Copy Settings)
The type of original and the desired type of copy can be specified. In addition, the
document orientation and the position of the binding margin can also be specified.
The Copy settings are described below. For details about the Original setting and
the document orientation and binding margin position, refer to p. 5-15 and p. 5-26.
The following nine Copy settings are available.
G Single-sided ("1" setting)
G
Double-sided ("2" setting)
G
Single-sided 2in1 ("1-2in1" setting)
G
Double-sided 2in1 ("2-2in1" setting)
G Booklet ("4in1/Booklet" setting)
G Booklet-binding ("Booklet Creation" setting)
G Center-erasing ("Center Erase" setting)
G Single-sided 4in1 ("1-4in1" setting)
G Double-sided 4in1 ("2-4in1" setting)
Note
Double-sided, double-sided 2in1 and double-sided 4in1 copying are only avail-
able if the optional duplex unit is installed.
Booklet-binding and center-erasing are only available if the optional finisher DF-
625 is installed.
5-20
5.6 Selecting the Orig > Copy Settings (Copy Settings)