Sorting Automatically [Sort Copy] - Kyocera KM-2030 Instruction Handbook Manual

CHAPTER 5 FUNCTIONS

6. Sorting automatically [Sort copy]

Since copying is performed after memorizing multiple originals, copies
can be sorted into the required number of sets even without an
optional finisher.
NOTE
• If "ON" is set in "$ Rotate sort" on page 6-13, and the paper size is
11" 8 1/2", the orientation of each set of copies is changed, thus
making copies easy to handle. To use this setting, 11"
must be set lengthwise in one drawer and widthwise in the other.
• When using the multi-bypass for rotate sort copying, set the paper
size for the multi-bypass (see page 3-3).
1
Set the original(s).
2 Press the sort mode key to light the indicator.
5-9
3
Enter the number of copies and press the Start key.
When using the DF, scans and copies originals one at a time.
When setting the originals on the platen, go to the next step.
4
Set the next original and press the Start key.
8 1/2" paper
NOTE
• Repeat this operation for all originals.
5 After all the originals have been scanned, press the enter
key.
Copying will start.