Kyocera KM-C2030 Operation Manual page 34

2.1 Making Basic Copies
Make sure that the Zoom setting "×1.000" is selected.
• For details, refer to "Specifying a Zoom Setting"
Make sure that the Paper setting "Auto Paper" is
selected.
• For details, refer to "Selecting the Paper Setting"
Touch [OrigÖ Copy].
Make sure that the single-sided original and the
single-sided copy settings are selected.
• For details, refer to "Selecting the OrigÖ Copy
Touch [Photo/Density].
• Make sure that the Photo/Density setting
• Make sure that the standard (middle) Density
• For details, refer to "Selecting the Photo/Density
Touch [Auxiliary].
Check that no functions are selected. No Auxiliary
functions are used during basic copying.
• For details, refer to the Advanced Operations
Make sure that the number of copies is set to "1".
• To specify multiple copies, use the keypad to enter
Press the [Start] key. The copy job appears in the job
display.
• Copying is performed in the order that the job was
• If other jobs are being printed, the job will be
(p. 5-8).
(p. 5-12).
Settings" (p. 5-15).
"Text&Photo" is selected.
setting is selected.
Setting" (p. 5-31).
volume.
the desired number of copies. Up to 999 copies
can be specified.
programmed.
queued (multi-job feature).
2
2-3