Setting The Program Timer - Kenwood MDX-F1 Instruction Manual

Setting the Program Timer

Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.
With PROG 1 and PROG 2, two sets of time zones and operation contents can be programmed and
executed as required.
1
Make preparations for the play (recording).
To listen to CD
Insert a disc.
(Program playback is not possible.)
To listen to radio
The station should be preset prior
to the above.
÷ Timer reservation is possible for the two types PROG.1 and PROG. 2 at the same time.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2 do
not overlap.
2
Select a program No.
1Select "TIMER SET ?".
MENU
(Press the "SET/Demo" key
while the "?" mark is blinking.)
2 Select "PROG. 1 SET ?" or
"PROG. 2 SET ?".
3 Press the SET/Demo key.
0
(Press during display of the pro-
gram contents.)
To listen to MD
Load a disc.
(Program playback is not possible.)
For recording
Make preparations for recording.
¶
•
MD
º
TAPE
SET
SET
Adjust the clock before setting the timer.
Set a tape into.
Turning the knob switches the function as shown
in the display.
TAPE RVS.
REC MODE
AUTO PRESET
TIMER SET
A.P.S. SET
Turning the knob switches the function as shown
in the display.
1 O.T.T. SET
2
PROG. 1 SET
3
PROG. 2 SET
÷ The selected program No. lights.
Continued on next page
Contents
Timer operation
MDX-F1 (EN)
To listen to tape
?
?
(TUNER only)
?
?
?
?
?
45