Adjusting The Bass And Treble; Mdx-F1 (En - Kenwood MDX-F1 Instruction Manual

Adjusting the bass and treble

One-touch enhancement of bass and treble
"EX.BASS" (Extra Bass) : Enhances the bass tone
"LOUD" (Loudness)
SOUND
Fine adjustment of bass and treble (Remote control only)
1 Press the TONE key.
TONE
(Go to step 2 within 5 seconds.)
2 Adjust the VOLUME keys.
VOLUME
To decrease
regardless of the cur-
rent volume.
: Enhanced both the
bass and treble tones
according to the cur-
rent volume. (Effective
during low-volume lis-
tening)
To increase
Each press switches the modes as follows.
1 "EX.BASS" lights.
2 "LOUD" lights.
3 Both indicators off.
The tone adjusted using the "TONE" key
(see below).
Each press switches the operation.
1 "BASS" (low frequency) adjustment
B A S S
2 "TREBLE" (high frequency) adjustment
T R E B L E
3 Normal mode
÷ The levels of both "BASS" and "TREBLE" can be
adjusted in 2 steps in the range between -8 and +8.
÷ If tone control is started while the "LOUD" or
"EX.BASS" indicator is lit, the "LOUD" or "EX.BASS"
setting is canceled.
(The adjustment using the "TONE" key cannot be used
simultaneously with the adjustment using the
"EX.BASS" and/or "LOUD" switch.)
Contents
Let's put out some sound

MDX-F1 (EN)

- 6
+ 4
11