Table of Contents
Advertisement
System Setup
Setting the program timer
(TIMER SET)
The program timer makes it possible to play radio
broadcasting, a CD or a USB device on the specifi ed
time of the specifi ed day(s) of the week.
Up to 2 timer programs can be set.
•
Be sure to adjust the clock to the correct time. For the
procedure, see "Adjusting the time (TIME ADJUST)" (page
32).
•
When setting more than one timer program, reserve an
interval of at least 1 minutes between the time zones of
the programs.
1
Enter the setup mode.
Press [MODE].
2
Select "TIMER SET".
Press [G]/[H] to select,
then press [ENTER].
3
Select the program number.
Press [G]/[H] to select,
then press [ENTER].
PROG. 1 SET
PROG. 2 SET
Display when program 1 is selected.
K-323
Program 1 is selected.
Program 2 is selected.
34
4
Select and enter the program items.
Press [G]/[H] to select,
then press [ENTER].
ON/OFF
EVERYDAY
ON TIME
OFF TIME
PLAY MODE
VOLUME
PLAY SOURCE
For the setting items, see "Program item list" (page
35).
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Display when 2 programs 1 and 2 are set.
5
Turn the system OFF.
Press [K].
The [STANDBY/TIMER] indicator lights orange.
•
If the power cord is unplugged then plugged in or
after a power failure, adjust the time of the day again
(page 32).
Select timer ON/OFF.
Set the day(s) of the
week.
Select the ON time.
Select the OFF time.
Select the timer
operation mode.
Select the playback
volume.
Set the audio source.
Advertisement
Table of Contents
