Program Playback - Kenwood MDX-F1 Instruction Manual

Listening in the desired sequence
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the "CD" input. (Also press the 7 to enter stop mode.) #
1
Let the "PGM" indicator light.
2
Select track numbers in the order you want to play them.
1 Select the track.
(Go to step 2 within 8 seconds.)
2 Confirm the selection.
(To select more than one track,
repeat steps 1 and 2 for each
track.)
3
Start playback.
To stop playback
7
Press in stop mode
PGM
1 2 3
4 5 6
7 8 9
+10 0
PGM
CD
6
To quit the program mode
Clearing tracks from the end
STOP
PGM
(Example when the track in P-14 is
canceled)
÷ Each time the key is pressed, the
last track in the program is cleared.

(program playback)

Lights
PGM
TRACK NO.
0 1
PGM
0 5
P G M
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
÷ Up to 32 tracks can be programmed. When "FULL" is
displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR/DELETE key
and enter the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ "– – : – –" is displayed when the total programmed
period has attained 100 minutes or more.
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or the ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
Press in stop mode
CLEAR
/DELETE
- - P - 1 4
Contents
Playback of CD
0 0 0
P - 0 1
Program position of the
track to be selected next.
C D
Clearing all tracks
Goes off
PGM
÷ The entire program is cleared.
15
MDX-F1 (EN)
PGM