Operation of remote control unit
The keys on the remote control unit with the same names as on the main unit have the same function as the
keys on the main unit.
TAPE EQ. key
CD/MD/TAPE/TUNER operation keys
TIME DISPLAY key
1 Remove the cover.
After plugging the power cord of this unit, press the POWER (
the system ON. When the system is turned ON, press the key of the function to be operated.
Press the POWER (
The unit enters standby mode in which only the "STANDBY/TIMER" indicator is lit.
÷ When pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1
second or more between keys.
÷ The standard remote control range is within about 6 meters from the main unit front panel and within 30 degrees to
the left or right of the center line from the front. Be sure to point the remote control unit to the front panel.
1.The provided batteries are intended for use in operation checking, and their service life may be short.
2.When the remote controllable distance becomes short, replace both of the batteries with new ones.
3.If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
RANDOM TAPE O.T.E. MD O.T.E.
2 Insert batteries.
÷ Insert two R6 ("AA"-size) batteries following
the polarity indications.
) key again for OFF.
QUICK MOVE key
TITLE SEARCH key
TITLE INPUT key
TRACK EDIT key
TAPE O.T.E. key
MD O.T.E. key
) key of the remote control unit to turn
Controls and indicators
3 Close the cover.