Download Print this page

Kenwood MDX-F1 Instruction Manual page 40

Minidisc personal stereo system
Hide thumbs

Advertisement

Table of Contents
Contents
40
Dividing a track
Use the following procedure to divide a track
into two by inserting a track number in its
middle. Note that the track numbers of the tracks
located after the divided track are automatically
incremented.
Select the "MD" input. (Perform the operations in the following procedure while the display is blinking.) *
1
Play the track to be divided.
÷ This operation is also possible during pause.
2
Press the TRACK EDIT key at the desired position.
1 Press the TRACK EDIT key and
select "DIVIDE?".
2 Press the SET key.
3
Enter the track division.
4
After editing, eject and remove the mini disc.
With the MD, information is written in the disc when
the ejection operation is performed after editing. Af-
ter title input or editing, be sure to eject the minidisc
so that the data is written in it by "WRITING".
(TRACK DIVIDE)
TRACK EDIT
SET
ENTER
Image of track division
A
B
A
B
To abort operation, press the TRACK EDIT key again.
Each press switches the operation.
1 DIVIDE ?
2 COMBINE ?
3 ERASE ?
4 (Editing cancelled)
TRACK NO.
0 0 2
0 1 2
D I V I D E
0 0 2
< >
0 0 3
C O M P L E T E
÷ There is no blank space left between the two tracks.
÷ When the track to be split has a title, the two tracks will
have the same title.
÷ Up to 255 track numbers can be inserted additionally by
repeating 1 to 3 for each of them.
The "WRITING" display indicates that the recorded
and edited data are written in the MD. Be careful not
to apply impact to the unit during it.
If the power cord is unplugged before completion of
"WRITING", the recorded and/or edited data may be
lost.
MD Edit Functions
MDX-F1 (EN)
C
D
E
C
C
D
E
?
MD EDIT
?
MD EDIT
!

Advertisement

Table of Contents
loading

  Also See for Kenwood MDX-F1

  Related Manuals for Kenwood MDX-F1