Setting The Program Timer (Timer Setting) - Kenwood RD-K511USB Instruction Manual

Making the system setup using the Setup menu
K
TIMER SET
MULTI CONTROL
SETUP
ENTER
RETURN
78
K-511USB/RD-K511USB
Setting the program timer
(TIMER SETTING)
The program timer can be used to record radio
broadcasting in SD1/SD2 at the specifi ed day of
the week and time of the day as well as to play
radio broadcasting, CD or SD1.
Up to fi ve timer programs can be set. The setting
contents can be variable between program numbers.
Setting programs 1 to 3 (for exclusive used
in recording)
Radio broadcasting can be recorded in SD1. These
programs are designed for exclusive used in timer
recording so their setting is easier than programs 4 and 5.
The recording mode can be selected from SQ (standard
quality) and SLQ (long-hour).
Setting program 4 and 5 (for playback/recording)
Radio broadcasting, CD or SD1 can be played with timer
(TIMER PLAY). These programs are optimum for setting
as a morning call.
In addition, radio broadcasting can be recorded in SD1/SD2.
The recording mode can be selected from HQ (high
quality), SQ (standard quality) and SLQ (long-hour).
• Be sure to adjust the clock to the correct time. For the
procedure, see "Adjusting the time (TIME ADJUST)". (page
77)
1
Select "TIMER SETTING".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the PROGRAM number.
Press [MULTI CONTROL A/B].
Each press switches the selection.
PROGRAM 1 SET
Recording from
PROGRAM 2 SET TUNER
to SD1
PROGRAM 3 SET
Playback of TUNER/
PROGRAM 4 SET
CD/SD1
Recording from
PROGRAM 5 SET
TUNER to SD1/SD2
The display returns to the
RETURN
"SYSTEM SETUP" display.
3
Select the programming item.
Press [MULTI CONTROL A/B].
Each press switches the selection.
When PROGRAM1, 2 or 3 is selected in step 2
Select timer ON/OFF.
ON/OFF
Set the day(s) of the
OPERATION
week.
Select the ON time.
ON TIME
Select the OFF time.
OFF TIME
Select the recording
ON VOLUME
level.
Select a radio station.
TUNER PRESET
Select the recording
REC MODE
mode.
The display returns to
the "SYSTEM SETUP"
EXIT
display.
For the programming items when PROGRAM
4 or 5 is selected in step 2, see the "List of
programming items". (page 80)
4
Enter the selection of programming
item.
Press [ENTER].
5
Set the details of the programming item.
For the detail setting operation, see "List of
programming items". (page 80)
Set all of the necessary programming items by
repeating steps 3 to 5 for each.
6
Turn the system OFF.
Press [K].
The standby and time
indicators also light
green.
• The clock should be readjusted when the power plug is
disconnected or after a power failure. (page 77)
• When recording of radio broadcasting is programmed,
the fi rst section of the broadcasting may be cut off if ON
TIME is set exactly at the start time. To prevent this, it is
recommended to set ON TIME at about a minute earlier
than the start of the broadcasting to be recorded.
• When setting more than one timer program, reserve an
interval of at least 3 minutes between the time zones of
the programs.
To set using [TIMER SET] of the remote control unit:
Press [TIMER SET].
Each press switches the PROGRAM number.
Select the desired PROGRAM number and
perform steps 3 to 6.
English
79