Kenwood MDX-F1 Instruction Manual page 42

Contents
42
Erasing a single track
TRACK ERASE
During playback, it is possible to erase only the
track being played. The track numbers of the
tracks after the erased track will be adjusted.
Be careful in using this operation because a track
cannot be recovered once it has been erased.
Select the "MD" input. (Perform the operations in the following procedure while the display is blinking.) *
1
Make the preparations.
To erase one track (TRACK ERASE)
1 Start playback.
2 Select the track to be erased.
Return
2
Press the TRACK EDIT key repeatedly.
Select "ERASE ?".
Each press switches the operation.
TRACK NO.
0 0 2 0 1 2
0 0 2 E R A S E ?
(TRACK ERASE)
MD
6
4 ¢
P.CALL
Advance
TRACK EDIT
1 DIVIDE ?
2 COMBINE ?
3 ERASE ?
4 (Editing cancelled)
MD EDIT
or erasing all tracks on a disc
ALL ERASE
During stop, all tracks can be erased. Be careful
in using this operation because the tracks can-
not be recovered once the entire minidisc has
been erased.
To erase all tracks (ALL ERASE)
To abort operation, press the TRACK EDIT key again.
A L L
MD Edit Functions
(ALL ERASE)
(Enter stop status)
7
STOP
1 Select "ALL ERASE ?".
TRACK EDIT
Each press switches the operation.
1 MOVE ?
2 COMBINE ?
3 ALL ERASE ?
4 (Editing cancelled)
2 Press the SET key.
SET
E R A S E ?
Continued on next page
MDX-F1 (EN)
MD EDIT