Kenwood MDX-F1 Instruction Manual page 39

Moving a single track
This procedure shows you how to select and
move (insert) a track to the track number you
desire. The surrounding tracks are renumbered
automatically.
Repeating this procedure lets you arrange the
tracks in the order you desire.
Select the "MD" input. (Please execute operation in stopped condition.) *
Perform the operations in the following procedure while the display is blinking.
1
Select "MOVE ?".
1 Press the TRACK EDIT key.
TRACK EDIT
2 Press the SET key.
2
Select the track to be moved.
Select the movement destination track number and
press the SET key.
4 ¢
P.CALL
To decrease To increase
track No. track No.
3
Select the moving distination track.
Select the movement destination track number and
press the SET key.
4 ¢
P.CALL
To decrease To increase
track No. track No.
4
Enter the track movement.
ENTER
5
After editing, eject and remove the mini disc.
With the MD, information is written in the disc when
the ejection operation is performed after editing. Af-
ter title input or editing, be sure to eject the minidisc
so that the data is written in it by "WRITING".
(TRACK MOVE)
SET
SET
SET
Image of moving one track
A B
A C
To abort operation, press the TRACK EDIT key again.
Each press switches the operation.
1 MOVE ?
2 COMBINE ?
3 ALL ERASE ?
4 (Editing cancelled)
M O V E
- - - = > - - -
0 0 2 = > - - -
Track number to be moved
Moved track No.
0 0 2 = > 0 0 5
C O M P L E T E
÷ It takes a while until the execution completes.
The "WRITING" display indicates that the recorded
and edited data are written in the MD. Be careful not
to apply impact to the unit during it.
If the power cord is unplugged before completion of
"WRITING", the recorded and/or edited data may be
lost.
Contents
MD Edit Functions
MDX-F1 (EN)
C D E F
D E B F
?
MD EDIT
?
MD EDIT
?
MD EDIT
?
MD EDIT
!
39