Download  Print this page

Recording On Md - Kenwood MDX-F1 Instruction Manual

Minidisc personal stereo system
Hide thumbs

Advertisement

Table of Contents
Contents
Let's recording
28

Recording on MD

MD recording is possible as "digital recording", where the digital signal of the CD is used as it is, and as
"analog recording", where the analog signal of a broadcast etc. is converted to a digital signal.
1
Make the preparations for recording.
In the direction of the arrow
2
Select the source to be recorded.
Example:
To select the CD input
CD
6
÷ If a CD or tape has already been loaded, it starts to play now. Press the 7 key to stop it.
3
Start recording.
MD REC
÷ For recording from a CD, read "One-touch recording".
÷ Do not apply vibrations or impact during recording.
÷ The recording onto TAPE is not available during recording onto MD.
This unit cannot record audio in monaural mode.
1 Open the write protect tab of the Mini Disc to make
it recordable.
2 Load the Mini Disc.
CAUTION
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force insert a Mini Disc during the STANDBY mode, for this
may damage the mechanism.
TUNER (Broadcasts)
: Analog recording
CD
: Digital recording
TAPE : Analog recording
1 Press the "MD REC" key (the unit enters record-pause mode).
2 When the preparation is complete, press the "MD REC" key
again.
3 Play (or tune) the music source to be recorded.
2
3
0
1
C D
The character information display
shows the recording input source.
¤
Let's recording
MDX-F1 (EN)
p

Advertisement

Table of Contents
loading

  Also See for Kenwood MDX-F1

  Related Manuals for Kenwood MDX-F1