Versatile Dvd Play Features; Switching The Voice Language (Multi-Audio Function) - Kenwood DVF-9010 Instruction Manual

Versatile DVD play features

The following operations may not be available with certain DVD discs.
34
Software with which this function is avail-
able:
Switching the voice language
When a DVD disc contains recording of voices in multiple languages, the languages can be switched during playback.
1
Press the AUDIO key during playback.
RC
The language selected in the initial setup is used immediately
after turning power on or replacing disc. If the initially set
language does not exist in the disc, the priority language defined
for each disc is used.
2
Select the voice language with the joystick ( % , fi ).
RC
Press the AUDIO key or ENTER key to switch the display
off.
Switching the vocal of karaoke software on and off
1
Press the AUDIO key during playback.
RC
2
Select the voice language with the joystick ( % , fi ).
RC
Press the AUDIO key or ENTER key to switch the display
off.
DVD
5
AUDIO
8
1 ¡
ENTER
5
AUDIO
8
1 ¡
ENTER
(Multi-audio function)
LPCM
1 ENG 96k 24b
÷ The voice language display becomes "
in the disc.
LPCM
3 FRA 96k 24b
÷ If the desired language cannot be displayed by operating the joystick
repeatedly, the desired language may not be recorded in the current
disc.
Vocal
1
DVD karaoke (1-vocal disc)
ON - - - (OFF)
DVD karaoke (2-vocal disc)
1+2 V1 V2 - - - (OFF)
÷ Select an option with the joystick (@, #).
VCD karaoke (2-vocal disc)
L R L R
÷ Select an option with the joystick (%, fi).
DVF-9010 (En/E)
Remote control unit only
" when no voice is recorded
ON
Vocal
1 - - -
L R