Changing Initial Setup [5 Fl Display] - Kenwood DVF-9010 Instruction Manual

Changing initial setup [5 FL Display]

46
1
Perform steps 1 to 3 of the procedure in "Basic operation for changing the initial
setup".
2
Select the brightness item.
RC
1 Select an item with the joystick (%, fi).
2 Press the ENTER key.
The setup completes and the initial setup screen appears
again.
To return to the previous menu screen
Press the RETURN key.
To exit initial setup
Select "0 Exit" in the initial setup screen.
8
1
¡
ENTER
FL Display
1 Bright
2 Dim
3 Dim During DVD/VCD Play(Auto)
Press RETURN to cancel
Each press of the joystick (%, fi) switches the items as
follows.
1 1 Bright
: Sets the FL display always bright.
2 2 Dim
: Sets the FL display always dim.
3 3 Dim During DVD/VCD Play (Auto)
: Sets the FL display dim only during playback of a DVD or
VCD.
÷ The FL display becomes temporarily bright during slow playback,
forward search and reverse search.
Changing the initial setup
DVF-9010 (En/E)
q