Playback; Playing A Disc From The Beginning - Kenwood DVF-9010 Instruction Manual

Playback

The following procedure shows how to play a disc, such as a CD, VCD or DVD, from the beginning.
When playing a VCD with P.B.C. (Play-Back Control) capability, please read "Menu playback".
22
Preparation
1 Turn on the TV and set the input source of the TV to
"Video".
2 If the player is connected to a stereo system, etc., turn
on the associated components and set its input source
to "DVD".

Playing a disc from the beginning

1
Turn power ON.
Main unit
2
Insert (Remove) the disc.
Main unit
1 Set the mode switch to DVD.
2 Open the tray.
OPEN/CLOSE
3 Insert (Remove) the disc.
4 Close the tray.
OPEN/CLOSE
With certain discs, playback starts now.
If a menu screen appears on the TV screen, select the
desired items as described in steps 4 and 5 before
playing the disc.
3
Start playback.
Main unit
3
POWER
ON OFF
RC
DVD
CD
DVD
SET UP
0
0
OPEN
/ CLOSE
0
0
OPEN
/ CLOSE
RC
3
PLAY
Label side up
Disc tray
÷ Place the disc to be played properly by aligning it with the groove on the
tray. (If the disc is not placed horizontally, malfunction will result.)
÷ Do not touch the played side.
÷ Load only one disc.
÷ This unit cannot use a commercially available CD single (8 cm) disc
adapter.
÷ The PANEL UP/DOWN key of the main unit allows to open or close
only the panel.
Display during disc play
CD playback VCD playback
DVD VCD CD P.B.C. DOLBY DIGITAL DVD VCD CD
TITLE CHAPTER TRACK TITLE CHAPTER
0 1
DVF-9010 (En/E)
‡
For CD single (8 cm) or
DVD single (8 cm)
Other disc (12 cm)
DVD playback
P.B.C. DOLBY DIGITAL DVD VCD CD P.B.C. DOLBY DIGITAL
TRACK TITLE CHAPTER TRACK
0 1 0 1