Programming; Programming Tracks In The Desired Order - Kenwood DVF-9010 Instruction Manual

Programming

Desired tracks or chapters can be programmed and played back in a desired order. Up to 18 tracks (chapters) can be programmed
but the attempt to program a 19th track (chapter) is rejected.
30
Software with which this function is avail-
able:

Programming tracks in the desired order

1
Enter stop mode.
2
Select the program mode.
RC
DVD
CD
DVD
SET UP
3
Select the desired tracks (chapters) in the order you want to play them later.
RC
1 Select a track (chapter) number with the joystick (%, fi,
@, #).
2 Press the ENTER key.
3 Program other tracks (chapters) by repeating steps 1
and 2 for each of them.
4
Play the program.
RC
CD VCD
MENU
P.MODE
8
1 ¡
ENTER
3
PLAY
With a VCD, there is no relationship between the divisions in recording
and the track numbers, except of certain software such as karaoke
discs. As a result, the programming operation may not be usable
depending on software.
÷ To perform program playback of a P.B.C.-compatible VCD, first press
the 3 key then the 7 key to cancel the P.B.C. function.
Each press of the P.MODE key switches the play mode as
follows.
1 Track mode
: PROG./RANDOM goes off
2 Program mode
: PROG. lights up
3 Random play mode : RANDOM lights up
Choose a track, then press ENTER.
1 7 13 19
2 8 14 20
3 9 15 21
4 10 16
5 11 17
6 12 18
Clear last
Clear all
Press PLAY to start
Select
Choose a track, then press ENTER.
1 7 13 19 2
2 8 14 20
3 9 15 21
4 10 16
5 11 17
6 12 18
Clear last
Clear all
Press PLAY to start
Tracks (chapters) can also be selected with numeric keys.
(Set the remote control mode switch to "CD".)
To select track (chapter) No. 8
To select track (chapter) No. 18 : 18 ENTER
÷ Select "Clear last" with the joystick and press the ENTER key to clear
the currently last track (chapter) in the program one by one.
÷ The entire program can also be cleared by selecting "Clear all" with the
joystick then pressing the ENTER key.
÷ If you made a mistake, press the C (clear) key and select the correct
track (chapter).
÷ Tracks (chapters) will be played in the order you programmed them (i.e.
in order of program numbers).
÷ Pressing the 4 or ¢ key during program playback skips to the
previous or next track (chapter) in the program.
DVF-9010 (En/E)
Entry
Choose a track, then press ENTER.
1 7 13 19 2
2 8 14 20 8
3 9 15 21 3
\
4 10 16 5
5 11 17 18
6 12 18
Clear last
Clear all
Press PLAY to start
: 8 ENTER