Special Features; A Before Applying Power; A Safety Precautions - Kenwood DP-2060 Instruction Manual

Hide thumbs Also See for DP-2060:
Table of Contents

Advertisement

Special features
zti Caution: Read this page carefully to ensure safe operation.
Programmed Playback.Up to 20 of your favorite tunes can be programmed in any
order you want and can be played back.
EDIT function...This is an editing function that prevents the last tune on both
sides A and B from being interrupted, within a stipulated time,
when a CD is being recorded onto a cassette tape.
Before applying power
Units are designed for operation as follows.
U.S.A. and Canada.120 V only
U.K. and Australia.240 V only
Europe (Except for U.K.).230 V only
^
Other countries.110-120 / 220-240 V switchable
For the United Kingdom
Factory fitted moulded mains plug
1. The mains plug contains a fuse. For replacement, use only a 13-Amp
ASTA-approved (BS1362) fuse.
2. The fuse cover must be refitted" when replacing the fuse in the
moulded plug,
3. Do not cut off the mains plug from this equipment. If the plug fitted
is not suitable for the power points in your home, or the cable is too
short to reach a power point, then obtain an appropriate safety
approved extension lead or adaptor, or consult your dealer.
If nonetheless the mains plug is cut off, remove the fuse and
dispose of the plug immediately, to avoid a possible shock hazard
by inadvertent connection to the mains supply.
4: AC voltage selection
The'AC voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before connecting
the powercord to your AC outlet, make sure that the setting position
of this switch matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
AC voltage selector switch
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector switch,
Safety precautions
WARNING:
TO prevent fire or electric shock, do not expose this appliance
TO RAIN OR MOISTURE.
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER¬
VICING TO QUALIFIED SERVICE PERSONNEL,
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOL¬
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
i k
THE EXCLAMATION POINTWITHINAN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN¬
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
DP-2060/OP-1060 tEn)
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-1060

Table of Contents