Changing Initial Setup [9 Other Settings] - Kenwood DVF-9010 Instruction Manual

Changing initial setup [9 Other Settings]

52
1
Perform steps 1 to 3 of the procedure in "Basic operation for changing the initial
setup".
2
Select the item to be set.
RC
Other Settings
1 Still Mode
2 Audio during Search
3 TV Mode(4:3)
4 D.Range Control
0 Exit
1 Select an item with the joystick (%, fi).
2 Press the ENTER key.
3
Select the desired option.
RC
1 Select an item with the joystick (%, fi).
2 Press the ENTER key.
To return to the previous menu screen
Press the RETURN key.
To exit initial setup
Select "0 Exit" in the initial setup screen.
Automatic
On
Pan&Scan
On
8
1
¡
ENTER
8
1 ¡
ENTER
Each press of the joystick (%, fi) switches the items as
follows.
1 1 Still Mode
: Reduces image blur which tends to be observed on still
images.
2 2 Audio During search
: Switches the audio during forward search at the 1st speed
on or off.
3 3 TV Mode (4:3)
: Sets the TV screen mode when wide-screen software is
played through a standard-screen TV.
4 4 D. Range Control
: Sets the range of the audio output when a disc is played.
5 0 Exit
: Exits the current screen.
Setting details
When [1 Still Mode] is selected
1 Automatic (Factory setup)
Usually select this option, with which frame still image or field
still image are switched automatically.
2 Field
Select this option when image blur is observed when this item
is set to "Automatic".
When [2 Audio During Search] is selected
1 On (Factory setup)
Select this option if you want to output audio during forward
search at the 1st speed.
÷ Select "Off" if noise during search disturbs you.
2 Off
Select this option if you want to mute audio during forward
search at the 1st speed.
When [3 TV Mode (4:3)] is selected
1 Pan & Scan (Factory setup)
Select this option if you need a panned & scanned screen (which
is cut on the left and right sides) when playing wide-screen
software. However, even when this option is selected, software
without pan & scan specification is played in a letterbox screen.
2 Letterbox
Select this option if you need a letterbox screen (which has black
stripes on the top and bottom) when playing wide-screen soft-
ware.
When [4 D. Range Control] is selected
1 Off
Returns to the standard setup.
2 On (Factory setup)
This option reproduces a DVD with Dolby Digital recording in a
powerful sound even when the volume is low.
÷ This effect may not be available depending on the combination of
speakers.
Changing the initial setup
DVF-9010 (En/E)
q