Changing Initial Setup [3 Menu Language]; Changing Initial Setup [4 On-Screen Messages] - Kenwood DVF-9010 Instruction Manual

Changing initial setup [3 Menu Language]

1
Perform steps 1 to 3 of the procedure in "Basic operation for changing the initial
setup".
2
Select the item to be set.
RC
1 Select an item with the joystick (%, fi).
2 Press the ENTER key.
The setup completes and the initial setup screen appears
again.
To return to the previous menu screen
Press the RETURN key.

Changing initial setup [4 On-Screen Messages]

1
Perform steps 1 to 3 of the procedure in "Basic operation for changing the initial
setup".
2
Select the item to be set.
RC
1 Select an item with the joystick (%, fi).
2 Press the ENTER key.
The setup completes and the initial setup screen appears
again.
To return to the previous menu screen
Press the RETURN key.
8
1 ¡
ENTER
8
1 ¡
ENTER
Select the language
for these Menus.
1 English
2 Français
3 Deutsch
4 Italiano
5 Español
Press RETURN to cancel
Each press of the joystick (%, fi) switches the items as
follows.
1 1 English
2 2 Français
3 3 Deutsch
4 4 Italiano
5 5 Español
To exit initial setup
Select "0 Exit" in the initial setup screen.
On-Screen Messages
1 On
2 Off
Press RETURN to cancel
Each press of the joystick (%, fi) switches the items as
follows.
1 1 On
2 2 Off
To exit initial setup
Select "0 Exit" in the initial setup screen.
Changing the initial setup
DVF-9010 (En/E)
q
q
45