Programming Tracks In Desired Order (Pgm Mode) - Kenwood DPF-J3030 Instruction Manual

Programming tracks in desired order
Use the following procedure to select desired tracks (up to
32 tracks) from different discs and program them in the
16
desired order.
Preparation
÷ Set the CD player to stop mode.
1
Press so that the "PGM" indicator lights.
2
Select the disc.
1 Select the disc number.
Previous disc
Within 8 seconds!
2 Set the input.
3
Select the track number.
1 Input the track number.
1 2
H I
5 6
L M
9 0
P Q
Within 8 seconds!
2 Set the input.
4
Start playback.
CHARAC.
/P.MODE
DISC SKIP
DOWN UP
Next disc
SET
Go to step 3 within 8 sec.
3 4
J K
7 8
O
N
+10 +100
R S
SET
ENTER
6
(PGM mode)

Programming tracks in desired order (PGM mode)

P G M 3 S E L
P G M 0 1 E D
÷ The disc number can be selected directly by using the DISC SELECTOR
key and numeric keys in place of the DISC SKIP(DOWN/UP) keys.
÷ When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected by the disc title.
"Registration of Title"
÷ If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
Press the numeric keys in the following order...
8
Track No.8 :
1, 4
Track No.14 :
2, 0
Track No.20 :
P G M 0 1 E D
÷ To program the entire disc, press the SET key without inputting the
track number. "ALL" will be displayed.
÷ Program other tracks in the desired order by repeating steps 2 and 3.
÷ Up to 32 tracks can be programmed. "FULL" is displayed when no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and restart from step 2.
E C T 1 D I C S
2 0 0 1 D I C S
)
2 0 0 1 T - - C