Programming Tracks In Desired Order (Pgm Mode) (Mechanism-A Only) - Kenwood CD-2280M Instruction Manual

Programming tracks in desired order
Use the following procedure to select desired tracks (up to
32 tracks) from up to 200 discs and program them in the
16
desired order.
Preparation
÷ Load discs into the carousel.
÷ Set the Mechanism-A to stop mode.
1
Press so that the PGM indicator lights.
2
Select the disc.
1 Select the disc number.
2 Set the input.
Go to step 3 within 8 sec.
3
Select the track number.
1 Input the track number.
2 Set the input.
4
Start playback.
CHARACTER/
P.MODE
∞ DISC SKIP 5
Previous disc Next disc
Within 8 seconds!
SET
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
& ( ) – / QZ ' , : ? !
+100 0 +10
Within 8 seconds!
SET
6
(PGM mode) (Mechanism-A only)

Programming tracks in desired order (PGM mode) (Mechanism-A only)

0
: Keys and controls used in the operations described on this page.
DISPLAY-A
P G M
P G M
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
÷ When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected while looking at the registered contents.
"Registration of Title Name"
÷ If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
Press the numeric keys in the following order...
Track No.8 : 8
Track No.14 : 14
Track No.20 : 2)
P G M
÷ To program the entire disc, press the SET key without inputting the
track number. "ALL" will be displayed.
÷ When the disc corresponds to CD-TEXT, or when the track titles have
been registered, the track title will be displayed with scrolling. Tracks
can be selected while looking at the registered contents.
"Registration of Title Name"
÷ Program other tracks in the desired order by repeating steps 2 and 3.
÷ Up to 32 tracks can be programmed. "FULL" is displayed when no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and restart from step 2.
÷ Tracks will be played in the order they were programmed (in order of P
Nos.).
÷ If a track to be played is located in the disc played on Mechanism-B, that
track will be skipped.
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
For continuous playback
Press the CONTINUOUS PLAY key.
CD-2280M/DPF-J9010 (En)
3 S E L E C T 1 D
0 1 E D 2 0 0 1 D
0 1 E D 2 0 0 1 T
I C S
I C S
)
- - C
)