Installing A System Board - Dell PowerEdge C6220 Hardware Owner's Manual

Figure 3-50. Removing and Installing the System Board
1 screw (8)
3 system-board assembly

Installing a System Board

1 Unpack the new system board.
2 Holding the system board by the edges, slide the system board into the
system-board assembly.
3 Replace the eight screws to secure the system board to the system-
board assembly.
4
Transfer the processors to the new system board. See "Removing a
Processor" on page 130 and "Installing a Processor" on page 131.
5 Remove the memory modules and transfer them to the same locations
on the new board. See "Removing the Memory Modules" on page 183
and "Installing the Memory Modules" on page 184.
6 Connect the hard drive and power cables to the system board.
2 system board
Installing System Components | 189