Using the System Setup Program
Start Menu
The system employs the latest Insyde
memory. The Flash memory supports the Plug and Play specification, and
contains a System Setup program, the Power On Self Test (POST) routine,
and the PCI auto-configuration utility.
This system board supports system BIOS shadowing, enabling the BIOS to
execute from 64-bit onboard write-protected DRAM.
This Setup utility should be executed under the following conditions:
•
When changing the system configuration, configure items such as:
– Hard drives, diskette drives, and peripherals
– Password protection from unauthorized use
– Power management features
•
When a configuration error is detected by the system and you are
prompted to make changes to the Setup utility
•
When redefining the communication ports to prevent any
conflicts.
•
When changing the password or making other changes to the
security setup.
NOTE: Only items in brackets [ ] can be modified. Items that are not in brackets
are display only.
48
|
Using the System Setup Program
®
BIOS, which is stored in Flash
2