Dell PowerEdge C6220 Hardware Owner's Manual page 93

Token Setup option
480B C6 State
L3 Cache Power
480C
Control
L3 Cache Power
480D
Control
480E C7 State
480F C7 State
Non Coherent
4810
HT Link Width
Non Coherent
4811
HT Link Width
Non Coherent
4812
HT Link Speed
Non Coherent
4813
HT Link Speed
Non Coherent
4814
HT Link Speed
Non Coherent
4815
HT Link Speed
Non Coherent
4816
HT Link Speed
Non Coherent
4817
HT Link Speed
Memory Turbo
4820
Mode
Memory Turbo
4821
Mode
4822 NUMA Support
Description
The C6 is enabled by default.
The clock to idle subcaches in the L3 is not stopped.
The clock to idle subcaches in the L3 is stopped.
The C7 is disabled by user in their own liability. There will
be warning message in both the BIOS Setup help text and
the pop up message when the option is changing.
The C7 is enabled by default.
Set HT Link to 8 bit width.
Set HT Link 16 to bit width.
Set HT Link speed as 800MHz.
Set HT Link speed as 1000MHz.
Set HT Link speed as 1200MHz.
Set HT Link speed as 1600MHz.
Set HT Link speed as 2000MHz.
Set HT Link speed as 2600MHz.
Disables memory turbo mode.
Enables memory turbo mode.
Allows user enables the node interleave option for SLES11.
This is for NUMA systems that allow memory interleaving
across all processor nodes.
Installing System Components | 93