Cable Routing For Lsi 2008 Sas Mezzanine Card (2U Node) - Dell PowerEdge C6220 Hardware Owner's Manual

Cable Routing for LSI 2008 SAS Mezzanine Card (2U Node)

1 Connect the mini-SAS cable to the LSI 2008 SAS mezzanine card, and
connect the other end of the cable to the corresponding connector on
the system board. See Figure 3-39.
2 Connect the mini-SAS&SGPIO cable to the LSI 2008 SAS mezzanine
card, and connect the other end of the cable to the corresponding
connectors on the interposer extender. See Figure 3-39.
Figure 3-39. Cable Routing for LSI 2008 SAS Mezzanine Card
Item Cable
Mini-SAS
cable
Mini-SAS
/SGPIO cable
Power cable
From
(LSI 2008 SAS
Mezzanine Card)
Mini-SAS connector
4~7 (J4)
Mini-SAS connector
0~3 (J3)
Control connector
(J3) on the interposer
extender
To
(System Board and Hard
Drive to Backplane
SATAII Connectors)
Mini-SAS connector 0
SATAII connectors
0~3 and SGPIO 1
Front panel connector
1 on the system board
Installing System Components | 171