Installing The Expansion-Card Connector For 2U Node - Dell PowerEdge C6220 Hardware Owner's Manual

Figure 3-36. Removing and Installing the 2U Expansion-Card Connector
1 screw (4)
3 expansion-card bracket

Installing the Expansion-Card Connector for 2U Node

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Place the 2U expansion-card connector into the expansion-card bracket.
See Figure 3-35.
2 Replace the four screws securing the 2U expansion-card connector to
the expansion-card bracket. See Figure 3-35.
3 Place the 1.5U expansion-card connector into the expansion-card
bracket. See Figure 3-35.
2 2U expansion-card connector
Installing System Components | 167