Installing A Processor - Dell PowerEdge C6220 Hardware Owner's Manual

CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board. Be
sure to properly align the process or notch to the socket and insert straight down.
Do not move from side to side.
Figure 3-13. Removing and Installing a Processor
1 processor shield
3 notch in processor (4)
5 socket-release lever

Installing a Processor

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
NOTE: When installing only one processor, the processor must be installed in the
processor 0 (for the socket location, see "System Board Connectors" on page
255).
2 processor
4 socket key (4)
6 ZIF socket
Installing System Components | 131