Auto Attendant Schedule - AT&T SB67030 Administrator's Manual

Auto Attendant Schedule

You can accept the default Day and Night Start times or use the bottom portion of the Auto Attendant General Settings screen
to set the day and night start times for each day of the week.
To set the Auto Attendant schedule:
Figure 78. Auto Attendant Schedule for Day/Night Menus
System Configuration
Synapse Administrator's Guide
1. Log in as administrator. See
page
2. Click System Settings, then Auto Attendant, then
General Settings in the Navigation Menu at left.
3. Locate Schedule for Day/Night Menus, as shown in
Figure 78.
4. Click on the drop-down boxes to adjust the time in five-
minute increments. Use the three dots (...) entry to
continue the setting for the previous time period. In
Figure 78, for example, the weekend will use the time
settings of the Friday night setting.
5. When you are done, click
click
changes.
85
"Log in as Administrator" on
68.
to refresh the screen without saving the
to save these settings or