Deskset Admin Settings - AT&T SB67030 Administrator's Manual

Deskset Admin Settings

The WebUI provides an interface for setting up your system. See
a Deskset to set up some system features, based on a menu structure presented on the Deskset display.
To display the Admin Settings menu:
Menu
1. Deskset Settings
2. User Settings
3. Admin Settings
4. Deskset Information
Use or to scroll then press
SELECT or press 1 - 4.
Figure 26. Menu Screen
Admin Password
Enter Admin password:
Use dial pad to enter Admin password.
Press SELECT when done.
Backspc
Figure 27. Admin Password
Getting Started
Synapse Administrator's Guide
1. Press MENU to display the Menu screen shown in Figure 26.
2. Press 3 on the dial pad to display the Admin Settings screen shown in
on page 45.
3. Enter the Admin password, as shown in Figure 27, and press SELECT.
The operator's Deskset has a fifth choice, Auto Attendant Settings, on the
Menu screen.
Quick
The default Admin password is 12345. The Synapse Administrator should
Dial
change this password. See
Quick
Dial
Cancel
"The Web User Interface (WebUI)" on page
"System Basic Settings" on page
44
66. You can also use
Exercise 2
76.