AT&T SB67030 Administrator's Manual page 53

To set the IP Configuration:
IP Settings
1. IP Configuration Static
2. Set/Edit Static IP
3. IP Status
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 41. IP Configuration
Getting Started
Synapse Administrator's Guide
1. Access the Admin Settings menu: Press MENU, then press 3 on the dial pad, then
enter the Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings menu shown in Figure 40.
3. Press 1 to select IP Configuration.
4. Press the or
in Figure 40 and Figure 41.
Quick
Dial
5. Press
Navigation key to toggle between
to accept the changes and return to the Admin Settings menu.
53
and , as shown